Installation How-To Archives - Page 3 of 4 - For The Workshop

Oh, She's Beefy!: How to Install a Set of MevoTech TTX Front Tie Rod Ends [Infographic]

If you’re anything like me, you sometimes enjoy putting upgraded […]

0

Let's Make This Easy.: How to Install a Drain Plug Onto the RDU and Perform a Fluid Exchange on It [Step-By-Step Guide]

Drilled drain plug and filled unit with some Amsoil 80W90 […]

0

PFFFFHHHH, Who Says You Can't Do This?: How to Create In-Cabin Access for the LPFP Module [Step-By-Step Guide]

I was really dreading installing the fuel hanger that I […]

0

We Went From Mild to Wild!: How to Create a Full Custom Exhaust System [Infographic]

I get asked a lot about my exhaust system, so […]

0

Spare Tire? PFFFFHHHH…We Don't Need This!: Save 46 LBS by Removing the Spare Tire [Step-By-Step Guide]

I am always looking at ways to shave weight on […]

0

Let's All Just Keep Our Cool, OK?: Mitigating Heatsoak of the Intake Manifold [Step-By-Step Guide]

About a year ago I went to the drag strip […]

0

This Thing Is Tragic!: An In-Depth Analysis of Potential PTU Improvements [Step-By-Step Guide]

Introduction This is my attempt at doing what little we […]

0

Improve Handling? Let's Hear It for the Germans!: Improving the Suspension by Upgrading to Bilstein B6 Shocks and Struts [Step-By-Step Guide]

At the time of this write-up, the highest performance shocks/struts […]

0

Make it Toit! Like a Tiger!: Improve Fitment of the 70mm BBK Throttle Body [Infographic]

Lee Ament of Ortiz Performance hooked me up on a […]

0

Off the Hook? Hook Me Up? Something With 'Hook'…Help Me Out Here.: How to Create and Install a Custom Tow Hook [Step-By-Step Guide]

I’m one of those guys who likes the look of […]

0

More Fuel? Yeah, We Can Do That.: How to Convert Your Fuel Pump Module to Accept the DW300c [Step-By-Step Guide]

Just a short (by short, I mean LONG) and unedited […]

0

You Want Data? Here It Is…ALLLLLL of It!: How to Install a Tablet as a Gauge Display for Torque Pro [Step-By-Step Guide]

This is one, strangely, that I’ve had tons of people […]

0

Time to Stiffen Up That Bottom End.: Firm Up Shifting With Installation of the Gen2 Anthony DiCunzolo Transmission Mounts [Step-By-Step Guide]

Wanted to make a quick (aka, LONG) video of the […]

0

Light It Uuupppppp!!!: How to Install a Pair of Diode Dynamics SS3 Pro Foglights [Step-By-Step Guide]

I always wanted to have better lighting on this vehicle […]

0

From Squish to Stiff…it's TWO things!: How to Install the Steeda Rear Sway Bar, Toe Link & Trailing Arm [Step-By-Step Guide]

This project started when I got wind of the recall […]

0